5.When placing the pieces, the lathe should distinguish the upper and lower sides of the piece. On the front and back, recognize the position line of each item.

6.Turn the lever switch to the right to start the machine. At this time, the computer embroidery machine starts embroidering. Move the lever switch to the left to stop the machine.

7. In the process of embroidering, if there are missing needles, jumping needles, and strands, the needle should be retracted and the pieces should be kept clean.

 8.When the embroidery is completed, the operator should take back the pieces and put them in accordance with the prescribed code. The above steps will be repeated to form a scale production.

www.cnjinlong.net